List Price: $1,595.00
Our Price: $1,062.91
Buy CISCO #CISCO1941/K9 1941 w2 GE 2 EHWIC slots 256M: Networking Products - Amazon.com FREE DELIVERY possible on eligible purchases. Cisco 2911, Cisco 2921, Cisco 2951, Cisco 3925, Cisco 3925E, Cisco 3945, and Cisco 3945E. Digital voice for 1-Port and 2-Port HWICS is only supported on motherboard (MB) HWIC slots. The CUCM releases CUCM 7.1(5) and CUCM 8.0(2) are the minimum releases supported for voice on HWIC-1CE1T1-PRI and HWIC-2CE1T1-PRI.
Cisco 1941 Series Integrated Services Routers Data Sheet. For example, it comes with a single slot for the internal services module and also features a single wide slot for the HWIC. This feature is absent from the 1921 router which was the earliest to have been released in the 1900 series. Bonus spins on Starburst or Berryburst Max are subject to change & must be used Cisco Hwic Slot within 3 days from activation. Bonus spins are activated after wagering a min. The welcome bonus and spins must be wagered 35x times before the bonus or Cisco Hwic Slot any winnings can be withdrawn. Stake using bonus is £5.
Overview:
The Cisco 1941 Integrated Services Router (ISR) delivers highly secure data, mobility, and application services. Key features include:
- 2 integrated 10/100/1000 Ethernet ports
- 2 enhanced High-Speed WAN Interface Card slots that can host 2 single wide or 1 double wide and 1 single wide (e)HWIC
- 1 Internal Services1 Internal Services Module slot
- Fully integrated power distribution to modules supporting 802.3af Power over Ethernet (PoE) and Cisco Enhanced PoE
- Security Embedded hardware-accelerated VPN encryption
- Secure collaborative communications with Group Encrypted Transport VPN, Dynamic Multipoint VPN, or Enhanced Easy VPN
- Integrated threat control using Cisco IOS Firewall, Cisco IOS Zone-Based Firewall, Cisco IOS IPS, and Cisco IOS Content Filtering
- Identity management that uses authentication, authorization, and accounting (AAA), and public key infrastructure
Cisco 1900 Series Integrated Services Routers build on 25 years of Cisco innovation and product leadership. The new platforms are architected to enable the next phase of branch-office evolution, providing rich media collaboration and virtualization to the branch while maximizing operational cost savings The Integrated Services Routers Generation 2 platforms are future-enabled with multi-core CPUs, Gigabit Ethernet switching with enhanced POE, and new energy monitoring and control capabilities while enhancing overall system performance. Additionally, a new Cisco IOS Software Universal image and Services Ready Engine module enable you to decouple the deployment of hardware and software, providing a stable technology foundation which can quickly adapt to evolving network requirements. Overall, the Cisco 1900 Series offer unparalleled total cost of ownership savings and network agility through the intelligent integration of market leading security, unified communications, wireless, and application services.
Cisco 1941 builds on the best-in-class offering of the existing Cisco 1841 Integrated Services Routers by offering 2 models-Cisco 1941 and Cisco 1941W. In addition to the support of a wide range of wireless and wired connectivity options supported on Cisco 1941 Series, Cisco 1941W offers integration of IEEE 802.11n access point which is backwards compatible with IEEE 802.11a/b/g access points.
All Cisco 1900 Series Integrated Services Routers offer embedded hardware encryption acceleration, optional firewall, intrusion prevention, and application services. In addition, the platforms support the industries widest range of wired and wireless connectivity options such as T1/E1, xDSL, 3G, and GE.
Features & Benefits:
The Integrated Services Routers Generation 2 (ISR G2) provide superior services integration and agility. Designed for scalability, the modular architecture of these platforms enables you to grow and adapt with your business needs.
Key features and benefits of the Cisco 1941 Integrated Services Router Series | |
---|---|
Benefits | Description |
Service Integration |
|
Services on Demand |
|
High Performance with Integrated Services |
|
Network Agility |
|
Energy Efficiency | The Cisco 1941 Series architecture provides energy savings features that include the following:
|
Investment Protection | The Cisco 1941 Series maximizes investment protection by supporting:
|
Architecture & Modularity
The Cisco 1941 Series is architected to meet the application demands of today's branch offices with design flexibility for future applications. The modular architecture is designed to support expanding customer requirements, increased bandwidth, and fully integrated power distribution to modules supporting 802.3af Power over Ethernet (PoE) and Cisco Enhanced PoE (ePoE). Table 2 lists the architectural features and benefits of the Cisco 1941 Series
Architectural Features and Benefits | |
---|---|
Architectural Feature | Benefits |
Modular Platform |
|
Processors |
|
MultiGigabit Fabric |
|
Embedded IPSec/SSL VPN Hardware Acceleration |
|
Integrated Gigabit Ethernet Ports |
|
Innovative universal-serial-bus (USB)-based console access |
|
Optional Integrated Power Supply for Distribution of Power Over Ethernet (PoE) |
|
Integrated Wireless LAN |
|
Modularity Features and Benefits
The Cisco 1941 provides significantly enhanced modular capabilities offering investment protection for customers. Most of the modules available on previous generations of Cisco routers, such as the Cisco 1841 ISR, are supported on the Cisco 1941. Additionally, modules used on the Cisco 1941 can easily be interchanged with other Cisco routers to provide maximum investment protection. Taking advantage of common interface cards across a network greatly reduces the complexity of managing inventory requirements, implementing large network rollouts, and maintaining configurations across a variety of branch-office sizes.
Modularity-Features and Benefits | |
---|---|
Feature | Benefits |
Cisco Enhanced High Speed WAN Interface Card (EHWIC) |
|
Cisco Internal Services Module (ISM) |
|
Compact Flash Slotss | • Two external Compact Flash slots are available on the Cisco 1941. Each slot can support high-speed storage densities upgradeable to 4GB in density. |
USB 2.0 Ports | • Two high-speed USB 2.0 ports are supported. The USB ports enable another mechanism secure token capabilities and storage. |
Cisco IOS Software
The Cisco 1941 Series Integrated Services Routers deliver innovative technologies running on industry-leading Cisco IOS Software. Developed for wide deployment in the world's most demanding enterprise, access, and service provider networks, Cisco IOS Software Release 15 M & T provides support for a comprehensive portfolio of Cisco technologies, including new functionality and features delivered in Releases 12.4 and 12.4T, and new innovations that span multiple technology areas, including security, voice, high availability, IP Routing and Multicast, quality of service (QoS), IP Mobility, Multiprotocol Label Switching (MPLS), VPNs, and embedded management.
Cisco IOS Software Licensing and Packaging
A single Cisco IOS Universal image encompassing all functions is delivered with the platforms. You can enable advanced features by activating a software license on the Universal image. In previous generations of access routers, these feature sets required you to download a new software image. Technology packages and feature licenses, enabled through the Cisco software licensing infrastructure, simplify software delivery and decrease the operational costs of deploying new features.
Four major technology licenses are available on the Cisco 1941 Series Integrated Services Routers; you can activate the licenses through the Cisco software activation process.
- IP Base: This technology package is available as default.
- Data
- Security (SEC) or Security with No Payload Encryption (SEC-NPE)
Key Branch Office Services
The Cisco Integrated Services Routers are industry-leading routers that offer unprecedented levels of services integration. Designed to meet the requirements of the branch office, these platforms provide a complete solution with voice, security, mobility and data services. Businesses enjoy the benefit by deploying a single device that meets all their needs and save on capital and operational expenses.
Integrated Network Security for Data and Mobility
Security is essential to protect a business' intellectual property while also ensuring business continuity and providing the ability to extend the corporate workplace to employees who need anytime, anywhere access to company resources. As part of the Cisco' SAFE architectural framework that allows organizations to identify, prevent, and adapt to network security threats-the Cisco 1900 Series Integrated Services Routers facilitate secure business transactions and collaboration
The Cisco IOS Software Security technology package license for the Cisco 1900 Series offers a wide array of common security features such as advanced application inspection and control, threat protection, and encryption architectures for enabling more scalable and manageable VPN networks in one solution set. The Cisco 1941 Series offers native hardware-based encryption acceleration to provide greater IPSec throughput with less overhead for the router processor when compared with software-based encryption solutions. Cisco Integrated Services Routers offer a comprehensive and adaptable security solution for branch-office routers that include features such as:
- Secure connectivity: Secure collaborative communications with Group Encrypted Transport VPN (GETVPN), Dynamic Multipoint VPN (DMVPN), or Enhanced Easy VPN.
- Integrated threat control: Respond to sophisticated network attacks and threats using Cisco IOS Firewall, Cisco IOS Zone-Based Firewall, IOS IPS, IOS Content Filtering and Flexible Packet Matching (FPM).
- Identity Management: Intelligently protecting endpoints using technologies such as authentication, authorization, and accounting (AAA) and public key infrastructure (PKI).
Wireless and Mobility Services
Wireless LAN
The Cisco Integrated Services Routers supporting the Cisco Unified Wireless Network enable deployment of secure, manageable WLANs optimized for remote sites and branch offices, including fast secure mobility, survivable authentication, and simplified management. The Cisco Unified Wireless Network addresses critical points of potential failure and helps enable resiliency and survivability for WLANs at remote locations and branch offices. This solution protects the WLAN by providing fast recovery from a variety of faults that may occur. With Cisco's high availability for remote WLANs, hardware and software work together to enable rapid recovery from disruptions and help ensure fault transparency to users and network applications
The new Cisco 1941W with IEEE 802.11n integrated access point support both unified and autonomous deployments. This integrated Wi-Fi access point offers IEEE 802.11n draft 2.0 standard support for mobile access to high-bandwidth data, voice, and video applications through the use of multiple-input, multiple-output (MIMO) technology that provides increased throughput, reliability, and predictability. IEEE 802.11n wireless networks create a cohesive working environment by combining the mobility of wireless with the performance of wired networks. Cisco has innovative, next-generation wireless solutions that offer greater performance and extended reach for pervasive wireless connectivity. IEEE 802.11n technology delivers outstanding reliability and up to nine times the throughput of current IEEE 802.11 a/b/g networks. It makes wireless networks an integral part of every type of organization by offering the following benefits:
- Data rates of up to 600 Mbps support more users, devices, and mission-critical, bandwidth-intensive applications.
- New MIMO technology provides predictable WLAN coverage and reliable connectivity.
- Next-generation wireless technology provides superior investment protection to support emerging mobile applications.
These routers help extend corporate networks to secure remote sites while giving users access to the same applications found in corporate offices for both data and voice applications. When users require WLAN access, visibility and control of network security are even more critical at the remote site. The new fixed Cisco Integrated Services Routers meet this need with a single device that combines integrated IEEE 802.11a/b/g/n capabilities with security features such as Wi-Fi Protected Access (WPA), including authentication with IEEE 802.1X with the Cisco Light Extensible Authentication Protocol (LEAP) and Protected EAP (PEAP) and encryption with the WPA Temporal Key Integrity Protocol (TKIP).
Wireless WAN
Cisco third-generation (3G) wireless WAN (WWAN) modules combine traditional enterprise router functions, such as remote management, advanced IP services such as voice over IP (VoIP), and security, with mobility capabilities of 3G WAN access. Using high-speed 3G wireless networks, routers can replace or complement existing landline infrastructure, such as dialup, Frame Relay, and ISDN. Cisco 3G solutions support 3G standards High-Speed Packet Access (HSPA) and Evolution Data Only/Evolution Data Optimized (EVDO) providing you with a true multipath WAN backup and the ability to rapidly deploy primary WAN connectivity.
Integrated LAN Switching
The Cisco 1941 Integrated Services Router Series will support the EHWIC LAN modules when they become available in future. The Cisco 1941 Series support the existing single wide EtherSwitch HWIC and the double wide HWIC-D modules, which greatly expand the router's capabilities by integrating industry leading Layer 2 or Layer 3 switching.
Application Services
As organizations continue to centralize and consolidate their branch IT infrastructure in an effort to reduce cost and complexity in the branch office, they are challenged to provide adequate user experience, ensure continuous service availability, and deliver business-relevant applications when and where they are needed. To address these challenges, the Cisco 1941 Series provides the ability to host Cisco, 3rd party, and custom applications on Cisco Services Ready Engine (SRE) module that seamlessly integrate into the router. The module has its own processor, network interface, and memory that operate independently of the host router resources, helping to ensure maximum concurrent routing and application performance while reducing physical space requirements, lowering power consumption, and consolidating management.
Cisco Services Ready Engine
The Cisco Services Ready Engine solution is available in a Internal Service Module (ISM) form-factor. The Internal Service Module hardware offers up to a seven times performance improvement over the previous-generation Advanced Integration Modules and provides a x86 processor. The Cisco SRE module enables on-demand provisioning of branch-office applications on the Cisco 1900 Series platforms so that you can deploy the right application, at the right time, in the right place. The hardware and software decoupling provided by the service-ready deployment model enables applications to be provisioned on the module at the time of its installation or remotely anytime thereafter. Supported solutions include Cisco Application Extension Platform (AXP), Cisco Wireless LAN Controller (WLC), and other applications under development. The Service Ready Engine enables organizations of various sizes to future-proof their network by allowing them to quickly deploy new branch-office applications without deploying new hardware, reducing the cost of rolling out branch-office services.
Managing Your Integrated Services Routers
Cisco 1941 Hwic Slots Coin
Network Management applications are instrumental in lowering Operating Expenditures (OPEX) while improving network availability by simplifying and automating many of the day-to-day tasks associated with managing an end-to-end network. 'Day-one-device-support' provides immediate manageability support for the Integrated Services Router enabling quick and easy deployment, monitoring and troubleshooting from Cisco and third party applications.
Organizations rely on Cisco, third-party and in-house developed network management applications to achieve their Opex and productivity goals. Underpinning those applications are the embedded management features available in every ISR. The new ISRs continue a tradition of broad and deep manageability features within the devices. Features such as IPSLA, EEM, Netflow, allow you to know what's going on in your network at all times. These features along with SNMP and SYSLOG support enable your organization's management applications.
Cisco 1941 with Cisco IOS Software Feature and Protocol High-Level Support | |
---|---|
Protocols | IPv4, IPv6, static routes, Open Shortest Path First (OSPF), Enhanced IGRP (EIGRP), Border Gateway Protocol (BGP), BGP Router Reflector, Intermediate System-to-Intermediate System (IS-IS), Multicast Internet Group Management Protocol (IGMPv3) Protocol Independent Multicast sparse mode (PIM SM), PIM Source Specific Multicast (SSM), Distance Vector Multicast Routing Protocol (DVMRP), IPSec, Generic Routing Encapsulation (GRE), Bi-Directional Forwarding Detection (BVD), IPv4-to-IPv6 Multicast, MPLS, L2TPv3, 802.1ag, 802.3ah, L2 and L3 VPN |
Encapsulations | Ethernet, 802.1q VLAN, Point-to-Point Protocol (PPP), Multilink Point-to-Point Protocol (MLPPP), Frame Relay, Multilink Frame Relay (MLFR) (FR.15 and FR.16), High-Level Data Link Control (HDLC), Serial (RS-232, RS-449, X.21, V.35, and EIA-530), Point-to-Point Protocol over Ethernet (PPPoE), and ATM |
Traffic management | QoS, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Hierarchical QoS, Policy-Based Routing (PBR), Performance Routing (PfR), and Network-Based Advanced Routing (NBAR) |
Cisco IOS Software Management Capabilities | |
---|---|
Feature | Description of Feature Supported by Cisco Integrated Services Routers |
WSMA | The Web Services Management Agent (WSMA) defines a mechanism through which you can manage a network device, retrieve configuration data information, and upload and manipulate new configuration data. WSMA uses XML-based data encoding that is transported by the Simple Object Access Protocol (SOAP) for the configuration data and protocol messages. |
EEM | Cisco IOS Embedded Event Manager (EEM) is a distributed and customized approach to event detection and recovery offered directly in a Cisco IOS Software device. It offers the ability to monitor events and take informational, corrective, or any desired EEM action when the monitored events occur or when a threshold is reached. |
IPSLA | Cisco IOS IP Service-Level Agreements (SLAs) enable you to assure new business-critical IP applications, as well as IP services that use data, voice, and video, in an IP network. |
SNMP, RMON, Syslog, NetFlow, TR-069 | Cisco 1900 Series Integrated Services Routers also support SNMP, Remote Monitoring (RMON), syslog, NetFlow, and TR-069 in addition to the embedded management features previously mentioned. |
Network Management Solutions | ||
---|---|---|
Operational Phase | Application | Description |
Device staging and configuration | Cisco Configuration Professional |
|
Networkwide deployment, configuration, monitoring, and troubleshooting | CiscoWorks LMS |
|
Networkwide staging, configuration, and compliance | CiscoWorks NCM |
|
Security staging, configuration, and monitoring | Cisco Security Manager |
|
Configuration and provisioning | Cisco Unified Provisioning Manager |
|
Staging, deployment, and changes of licenses | Cisco License Manager |
|
Staging, deployment, and changes to configuration and image files | Cisco Configuration Engine |
|
As businesses strive to lower the total cost of ownership in running their network and increase their overall employee productivity with more centralize and collaborative network applications, more intelligent branch office solutions are required. The Cisco 1941 Series offers these solutions by providing enhanced performance and increased modular density to support multiple services. The Cisco 1941 Series is designed to consolidate the functions of separate devices into a single, compact system that can be remotely managed.
Technical Specifications:
Product Specifications of Cisco 1941 Integrated Services Router | |
---|---|
Cisco1941, Cisco1941W | |
Services and Slot Density | |
Embedded hardware-based crypto acceleration (IPSec + SSL) | Yes |
Total Onboard LAN 10/100/1000 | 2 |
RJ-45-Based Ports | 2 |
SFP-Based Ports | 0 |
SM Slots | 0 |
Double-Wide SM Slots | 0 |
EHWIC Slots | 2 |
Double-Wide EHWIC slots (use of a double-wide EHWIC slot will consume two EHWIC slots) | 1 |
ISM Slots | 1 (0 on the Cisco 1941W) |
Memory (DDR2 Error Correction Code [ECC] ECC DRAM) - Default | 512 MB |
Memory (DDR2 ECC DRAM) - Maximum | 2.0 GB |
Compact Flash (external) - Default | slot 0: 256 MB slot 1: none |
Compact Flash (external) - Maximum | slot 0: 4 GB slot 1: 4 GB |
External USB flash memory slots (Type A) | 2 |
USB Console Port (Type B) (up to 115.2 kbps) | 1 |
Serial Console Port (up to 115.2 kbps) | 1 |
Serial Auxiliary Port (up to 115.2 kbps | 1 |
Power Supply Options | AC, POE |
Redundant Power Supply Support | No |
Power Specifications | |
AC Input Voltage | 100-240 V ~ |
AC Input Frequency | 47-63 Hz |
AC Input Current range AC Power Supply (Max) (Amps) | 1.5-0.6 |
AC Input Surge Current | <50 A |
Typical Power (No Modules) | 35 W |
Maximum Power capacity with AC power supply | 110 W |
Maximum Power capacity with PoE power supply (platform only) | 110 W |
Maximum PoE device power capacity with PoE power supply | 80 W |
Physical Specifications | |
Dimensions (H x W x D) | 3.5 in x 13.5 in x 11.5 in |
Rack Height | 2 RU |
Rack-mount 19in. (48.3 cm) EIA | Included |
Wall-mount (refer to installation guide for approved orientation) | Yes |
Weight-with AC power supply (no modules) | 12 lbs |
Weight-with POE power supply (no modules) | 12.8 lbs |
Maximum Weight-Fully Configured | 14 lbs |
Airflow | Front to Side |
Environmental Specifications | |
Operating Condition | |
Temperature-5906 feet (1800 m) max. altitude | 0-40°C (32-104°F) |
Temperature-9843 feet (3000 m) max. altitude | 0-25°C (32-77°F) |
Altitude | 3000 m (10000 ft) |
Humidity | 10 to 85% RH |
Acoustic: Sound Pressure (Typ/Max) | 26/46 dBA |
Acoustic: Sound Power (Typ/Max) | 36/55 dBA |
Transportation/Storage Condition | |
Temperature | -40 - 70 oC (-40 - 158 oF) |
Humidity | 5 to 95%RH |
Altitude | 4570m (15000 ft) |
Regulatory Compliance | |
Safety | UL 60950-1 CAN/CSA C22.2 No. 60950-1 EN 60950-1 AS/NZS 60950-1 IEC 60950-1 |
EMC | 47 CFR, Part 15 ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS 3548 Class A VCCI V-3 CNS 13438 EN 300-386 EN 61000 (Immunity) EN 55024, CISPR 24 EN50082-1 |
Telecom | TIA/EIA/IS-968 CS-03 ANSI T1.101 ITU-T G.823, G.824 IEEE 802.3 RTTE Directive |
Documentation:
Download the Cisco 1900 Series Integrated Services Routers Datasheet (PDF).
Pricing Notes:
- Pricing and product availability subject to change without notice.
List Price: $1,595.00
Our Price: $1,062.91
Similar Messages:
ADVERTISEMENT
Cisco WAN :: 1941 ADSL Fail Over To 3G HWIC With IPSEC VPN
Jul 23, 2012The setup is a S2S VPN with failover to 3G HWIC in a Cisco 1941 however the IPSEC tunnel needs to remain up through 3G if ADSL fails.The failover works ok, however when plugging ADSL back in, the - 'sh crypto session' shows both dialer 0, and dialer 1 with the crypto map session to the other side of the VPN and either side is now not pingable.The NoIP DDNS updater client runs on a server in the network and all IP resolution to host1,host2 works ok (other side of VPN is Cisco 1921 with ADSL HWIC and 3G HWIC). [code]
Cisco WAN :: 1921 / 1941 - Unable To See HWIC-1DSU-56K4?
Aug 4, 2011We are currently moving from 1841 (EOL) to 1921/1941 routers. According to the module support doc [URL] this HWIC-1DSU-56K4 card is supported. We have tried both the 1921 and 1941 with the cards without any luck.
IOS Verison: c1900-universalk9-mz.SPA.152-1.T.bin
System Version: 15.0(1r)M9
Boot Error: %MAINBOARD-1-UNKNOWN_WIC: wic card in location 0/1 has an unknown id 0xB
Show Diag:
WIC Slot 1:
DSU 56K
WIC module not supported/disabled in this slot
Hardware revision 1.0 Board revision A0
[code]...
Cisco WAN :: 1941 Why Would CPU Usage Hover Around 45% Or So With One Machine Running Torrents
Jan 27, 2013I am running a 1941 isr g2 router, which, according to my specs is equivalent to a cisco 3825 - which i also own.Why would the cpu usage hover around 45% or so with ONE machine running torrents? There is really no packet inspection etc..or anything else that would cause the cpu to work really hard..I am on a 100/5 connection.
Internet Kicks Off When Plug In Router
Oct 25, 2012we have cable internet, the service has been going in and out for months now. Bought a new router still having problems. Cable company has been out several times, changed modem, etc. Now hooked up straight to cable with no router, working fine so far, but no wifi , kicks off when router is connected. In the past when router is on it will work for a few hours or even a day or two, then go out.
Ethernet Plug Connected To The Router?
Jun 20, 2012Have got one ethernet plug connected to the router and then one upstairs connected to my ps3, can I add another plug and connect another device to it or do i need two plugs to connect to another port on my router for it to work? If I buy another set of plugs will they still work or will they cause interference?
Plug Wireless AP Into A Wired Router?
Oct 16, 2012I have a router that was giver to me .I have a kinkle fire that I want to use from my home.I spent hours on the phone and someone @ ATT and some how the person gets lost when I ask them this questions.A total f 5 hours lost!
How To Make Modem Plug Into Switch Instead Of Router
Sep 6, 2011I have a network set up currently with a cable modem that goes into a router, the router then goes to a 16 port switch and the switch goes to computers, printers, and my server. I am trying to figure out how to make the modem plug into the switch instead of the router. I'm guessing my problem lies with the default gateway since that is the router. Any suggestions on this? Or how is the best way to set this up? I have 2 NICs on my server and the server has windows 2008 r2.
Modem Doesn't Have A Ethernet Plug In For Router
Jun 20, 2011My modem does not have a Ethernet plug in for my router. do I have to buy another modem for a 2nd computer?
Plug Wireless Router To Cable Modem?
Feb 4, 2012How do I plug the wireless router to the cable modem?
Kewadin Casino Manistique is located on US-2 west of the Mackinac Bridge in Manistique, Michigan featuring a spacious gaming area that houses a selection of more than 250 slot machines. Manistique kewadin casino rv park. We do not have a hotel at our Manistique location. But, Kewadin Casinos has formed partnerships with area hotels to help our customers plan their vacations. Whenever you're in Michigan's Upper Peninsula, you're never far from a Kewadin Casino experience. And that means moments you'll hold on to forever. From live entertainment, to gaming, promotions and events – there's always something going on at Kewadin. Get directions to any of our five Michigan casino. 2 Manistique, MI 49854 United States 906-341-2951 There were no results found. We are glad you enjoy and appreciate you recommending Kewadin Manistique Casino as a nice place to stop for a break during a long drive or on a rainy or hot day with its gift shop and restaurant, ample parking including some first-come-first-serve RV Parking for our customers.
Linksys Wireless Router :: WRT54G V1 Disconnect Power From Router For About 15 Seconds / Plug It Back In
Cisco WAN :: 1941 ADSL Fail Over To 3G HWIC With IPSEC VPN
Jul 23, 2012The setup is a S2S VPN with failover to 3G HWIC in a Cisco 1941 however the IPSEC tunnel needs to remain up through 3G if ADSL fails.The failover works ok, however when plugging ADSL back in, the - 'sh crypto session' shows both dialer 0, and dialer 1 with the crypto map session to the other side of the VPN and either side is now not pingable.The NoIP DDNS updater client runs on a server in the network and all IP resolution to host1,host2 works ok (other side of VPN is Cisco 1921 with ADSL HWIC and 3G HWIC). [code]
Cisco WAN :: 1921 / 1941 - Unable To See HWIC-1DSU-56K4?
Aug 4, 2011We are currently moving from 1841 (EOL) to 1921/1941 routers. According to the module support doc [URL] this HWIC-1DSU-56K4 card is supported. We have tried both the 1921 and 1941 with the cards without any luck.
IOS Verison: c1900-universalk9-mz.SPA.152-1.T.bin
System Version: 15.0(1r)M9
Boot Error: %MAINBOARD-1-UNKNOWN_WIC: wic card in location 0/1 has an unknown id 0xB
Show Diag:
WIC Slot 1:
DSU 56K
WIC module not supported/disabled in this slot
Hardware revision 1.0 Board revision A0
[code]...
Cisco WAN :: 1941 Why Would CPU Usage Hover Around 45% Or So With One Machine Running Torrents
Jan 27, 2013I am running a 1941 isr g2 router, which, according to my specs is equivalent to a cisco 3825 - which i also own.Why would the cpu usage hover around 45% or so with ONE machine running torrents? There is really no packet inspection etc..or anything else that would cause the cpu to work really hard..I am on a 100/5 connection.
Internet Kicks Off When Plug In Router
Oct 25, 2012we have cable internet, the service has been going in and out for months now. Bought a new router still having problems. Cable company has been out several times, changed modem, etc. Now hooked up straight to cable with no router, working fine so far, but no wifi , kicks off when router is connected. In the past when router is on it will work for a few hours or even a day or two, then go out.
Ethernet Plug Connected To The Router?
Jun 20, 2012Have got one ethernet plug connected to the router and then one upstairs connected to my ps3, can I add another plug and connect another device to it or do i need two plugs to connect to another port on my router for it to work? If I buy another set of plugs will they still work or will they cause interference?
Plug Wireless AP Into A Wired Router?
Oct 16, 2012I have a router that was giver to me .I have a kinkle fire that I want to use from my home.I spent hours on the phone and someone @ ATT and some how the person gets lost when I ask them this questions.A total f 5 hours lost!
How To Make Modem Plug Into Switch Instead Of Router
Sep 6, 2011I have a network set up currently with a cable modem that goes into a router, the router then goes to a 16 port switch and the switch goes to computers, printers, and my server. I am trying to figure out how to make the modem plug into the switch instead of the router. I'm guessing my problem lies with the default gateway since that is the router. Any suggestions on this? Or how is the best way to set this up? I have 2 NICs on my server and the server has windows 2008 r2.
Modem Doesn't Have A Ethernet Plug In For Router
Jun 20, 2011My modem does not have a Ethernet plug in for my router. do I have to buy another modem for a 2nd computer?
Plug Wireless Router To Cable Modem?
Feb 4, 2012How do I plug the wireless router to the cable modem?
Kewadin Casino Manistique is located on US-2 west of the Mackinac Bridge in Manistique, Michigan featuring a spacious gaming area that houses a selection of more than 250 slot machines. Manistique kewadin casino rv park. We do not have a hotel at our Manistique location. But, Kewadin Casinos has formed partnerships with area hotels to help our customers plan their vacations. Whenever you're in Michigan's Upper Peninsula, you're never far from a Kewadin Casino experience. And that means moments you'll hold on to forever. From live entertainment, to gaming, promotions and events – there's always something going on at Kewadin. Get directions to any of our five Michigan casino. 2 Manistique, MI 49854 United States 906-341-2951 There were no results found. We are glad you enjoy and appreciate you recommending Kewadin Manistique Casino as a nice place to stop for a break during a long drive or on a rainy or hot day with its gift shop and restaurant, ample parking including some first-come-first-serve RV Parking for our customers.
Linksys Wireless Router :: WRT54G V1 Disconnect Power From Router For About 15 Seconds / Plug It Back In
Apr 27, 2013I have a Linksys WRT54G2 v1 router which is having a daily problem of connectiing to the Internet on my home wireless LAN. My temporary solution is to disconnect the power from the router for about 15 seconds and plug it back in .. and all is well.. at least for another day or so.The real problem is that instead of properly connecting to IPv4 address 192.168.1.100 ... it randomly connects to Autoconfiguration IPv4 address 169.254.29.54 When this problem occurs the SSID list shows both my 192 connection as well as a public network with no Internet connection?
I've used this router for several years without a problem until I recently bought a new Canon wireless MG5320 printer which initially had problems connecting to my LAN. After a telco with tech support the printer works fine but now I am now experiencing the Autoconfig address problem.My LAN consist of the WRT54G router, a Motorola cable modem, a Lenovo laptop running Win7 64bit, a Hp desktop running Win7 64bit and the Canon wireless printer. (all connected wirelessly)
WinStar World Casino Hotel, Thackerville: See 9,480 traveler reviews, 603 candid photos, and great deals for WinStar World Casino Hotel, ranked #1 of 4 hotels in Thackerville and rated 4.5 of 5 at Tripadvisor. Every time you come to Choctaw Casino & Resort–Grant, you're at the center of it all. All of the gaming. All of the dining. All of the entertainment. Grant, OK 74738 (580) 326-8397. Call Us Get Directions. Complimentary for all of our hotel guests. Monday-Wednesday 7am-10:30pm. WinStar World Casino Hotel, Thackerville: See 9,228 traveler reviews, 601 candid photos, and great deals for WinStar World Casino Hotel, ranked #1 of 4 hotels in Thackerville and rated 4.5 of 5 at Tripadvisor. Winstar casino grant ok. The WinStar World Casino Hotel is determined to meet – and exceed – your every expectation. From your choice of three lavishly appointed hotel towers, you'll have a soaring view of the Oklahoma woods and hills or one of our glistening pools. Whatever you desire, we aim to satisfy – day or night. 777 Casino Ave Interstate 35, Thackerville, OK. Website +1 800-622-6317. 23 Restaurants within 5 miles. 1 Other Attraction within 5 miles. Toby Keith's I Love This Bar & Grill. All reviews rv park biggest casino players card winstar world casino this place is huge el fenix large casino poker room great casino dallas.
Can Plug A Wireless Router Into A Hard Wired Router Port
Mar 2, 2011can i use one of my hard wired router ports to plug in a wireless router and use them both?
Wireless :: No USB Port On Router To Plug Flash Drive?
Jul 25, 2011My router does not have a usb port. So what now?
6867R - Network Cable Is Unplugged When Plug ADSL Line To Router?
Nov 20, 2011I can connect to my router but not to Internet, it seams that ADSL line 'disconnects' my LAN/WLAN this issue is with Inalambrico 6867R router an other router, TP-Link is working great
Cisco WAN :: Difference Between HWIC-1ADSL-M And HWIC-1ADSL?
Jun 12, 2013What is the difference between HWIC-1ADSL-M and HWIC-1ADSL without the '-M'?Can either of the above ADSL cards be used in Cisco 3845 router? We are using HWIC-1ADSL-M in our Cisco 3845 routers everywhere?
Linksys Wireless Router :: EA3500 Disconnect After Plug In Portable Hard Drive
Mar 6, 2013I bought an EA 3500 refurbished through linksys. I can't configurate it using the CD-Rom. Always said 'can't find your router'. So I flash with the classic firmware, and it fixs the problem and automatically upgrade to smart Wi-Fi. That being said, whenever I plug in a portable hard drive, the router disconnect from internet after a minute. I tried my seagate HDD and also my flash driver. Both Lost internet after a minute or so. So I think it is probably the router's problem.
Cisco Hwic 1fe
Cisco WAN :: Running All Switches Running By Default Configuration And Connected To WS-C4506
Jun 11, 2013I have 30 switched in my corporate network it's all up and running all switches running by default configuration and connected to WS-C4506 core switch our dhcp server pooling 192.168.100.1/27 network. Now we need to configure new Vlan for finance department this department has more than 200 users. If my server distributes 192.168.200.0 range ip can vlan2 automatically assign ip 200.0 addresses to finance department.All switches running default config no ip address assigned.
Cisco Firewall :: Configuration Migration From ASA 5540 Running 7.2 To 5525X Running 9.1
May 7, 2013I need to replace an existing ASA 5540 with a new ASA 5525X. I would like to pre-stage and configure the new box with the existing config, migrate license and export certificate files before swapping it with the old one during a change window. The new firewall will run 9.1 on deployment. Now the same 7.2(4) cannot just be copied over to 5525X running the minimum 8.6 version. There is a Web based tool available at [URL] according to Cisco documentation but the page does not load for me (Cisco intranet only tool ?). Is there another tool for automatic conversion ?
Cisco WAN :: 2811 - Adding A HWIC In Router
Jun 12, 2011I have a Cisco 2811 router with c2800nm-adventerprisek9_sna-mz.124-2.T6.bin as IOS and i wsh to install this HWIC 4port to increase available ports on my router. Wish to know if this is going to work,that is, if i installed it the IOS available will recognise this card
Cisco WAN :: Install HWIC-1GE-SFP On 3845 Router
Jul 25, 2012In our Environmet we have 3845 Edge Router Current Ios Version is Version 12.4(1a),(c3845-advipservicesk9-mz.124-1a.bin)As management got another fiber leased line(Single Mode) for which i have install SFP slot part number HWIC-1GE-SFP,after installation of HWIC-1GE-SFP in router the follwing slot is showing
GigabitEthernet0/1/0
%HWIC_1GE_SFP-6-SFP_IN: Interface GigabitEthernet0/1/0 1000BaseLX SFP has been inserted
Interface IP-Address OK? Method Status Protocol
GigabitEthernet0/1/0 xx.xx.xx.xx. YES manual up down
for testing purpose i tried the same procedure into the switch and its working fine where as in Router the link is not coming up ,
Cisco WAN :: Configured New 2911 Router With HWIC-2T
Feb 24, 2013We have configured new 2911 router with HWIC-2T with it.However we are seeing serial interfaces up, but can hardly ping other end. Again we are seeing a lot of CRC errors on serial interface.
But if we connected same cable, with other old router 2811, it works fine. Confiuration is same on both the routers. [code]
Cisco WAN :: Configuring HWIC-8A On 2911 Router?
Oct 10, 2011I had purchased a HWIC-8A in an effort to provide terminal server capabilities into multiple routers. I had found a document that I thought would take me through the configuration but it doesn't appear that the command syntax is the same on the 2911's as it is in the document. Does any know how I would need to get this configured on the 2911 router?
Here is the document I was referencing
[URL]
Slap An HWIC - 4ESW Into A Router
May 9, 2012meaning slap an HWIC-4ESW into a router, say, an 1841, create an ether channel out of them to connect to my switch?
Cisco WAN :: Can't Put A Second HWIC-4ESW In A 3825 Router And Don't Work
Aug 4, 2012I put a second HWIC-4ES in a 3825 router and it does not work, only work the first card that is inserted, I use the slot 0 for it, the 0/0 and 1/0 work with serial card only if I put the HWIC-4ESW in this slots the router does not work, only work in 0/2 and 0/3 but only one, I need to know if there is a command to active it because the data sheet in CISCO indicate that this model of router support 2 HWIC-4ESW. url..
Cisco WAN :: Adding A HWIC 1FE Card To 2811 Router?
May 19, 2011I have a 2811 router runnning IOS 12.4(21) and have added an HWIC 1FE card to slot 2. But the card doesnot show up in the router and all the three lights on the HWIC card is steady green. I have gone through some cisco documentation and found that i have to upgrade the IOS.
I have few questions before doing the upgrade.
1. Which IOS version should I upgrade to?
2. Will this erase my exisitng running configuration ? I have VPN services, PPPoATM, PBR etc. all running on this router at present.
3. Presently i have a 128 MB CF card on the router. Will this be enough or do i need to upgrade this card also? Can i choose an IOS which will fit into this card otherwise while keeping all existng features?
4. I want to use the HWIC card for the ISP's internet service through PPPoE. Will this be possible with the upgraded IOS ?
Cisco WAN :: Router 2811 Can't Detect HWIC-2FE Card?
May 10, 2011I am trying to connect HWIC-2FE Card to my Cisco 2811 Router. The router is unable to detect the card. I get the following error message:
' %GT96K_FEWAN-1-UNKNOWN_WIC: NM slot 0, wic card has an unknown id 53BPort Statistics for unclassified packets is not turned on.'
Cisco WAN :: Which Type Of HWIC Card Should Use In 2911-sec / K9 Router
Feb 14, 2012I have cisco 2611 + NM1E , and i want to trade in for a cisco 2911 security router + HWIC4 Card.Which type of HWIC card should i use in the cisco2911-sec/k9 router?
Cisco WAN :: HWIC-2CE1T1-PRI Not Supported On 2801 Router?
Cisco Hwic 16a
Jun 18, 2012The HWIC-2CE1T1-PRI card isn't supported on a CISCO2801 router
Cisco WAN :: HWIC-3G-CDMA-S - Can't Access Router From Internet
Mar 31, 2012The problem is I can't access the router from the internet. I am also an ocean away from the site. I have an ugly hack set up where I access an inside PC with Teamviewer and then puTTy to the router, but it is slow, ugly, and doesn't fix my problem. I need to be able to set up internet accessible servers at this location for VOIP, VPN, and REAL remote access.Everything else works fine. Connection is stable. Speed is kinda ******, but that's not so important.
First off some specs:Cisco 2801c2801-ipvoicek9-mz.124-24.T1.binhwic-3g-cdma-sSprint 3G data plan
Ok, I have set up the previous equipment as a router for a branch office where 3G access is the only available internet access.I have had the excruciating experience of talking with Sprint Tech Support, and would rather shoot myself in the foot than do so again.
Here is what they told me: 'They block ports, but they can't tell me which ones.'Here is relevant info I have been able to gather.The IP connection the ISP gives us is not NATTED. That is the address at wimi.com and show int dialer 0 is the same one.Most forums say Sprint only blocks port 80.Zenmap (nmap for windows) says the router has NO open ports but DOES exist.Router does not respond to pingsCan't SSH into router from internetCan't access a test local server with port 8080 or 8081 open with the correct nat statement in Cisco routerNo filtering access-list for testing The config should be just fine as a base config for using hwic-3g-cdma-s as the main internet access interface for a router. Everything works fine aside from the lack of remote access.
So in my head it has to be one of 3 problems.
1. The card is doing some weird stuff to incoming requests
2. Sprint is blocking WAN requests on port 22, 2200, 8080, and 8081 and pings (tested). Maybe they block all WAN requests?
3. There is something wrong with my config.
why I can't remote access into my router or things to try with the config?
Below are some config pastes:
chat-script cdma ' 'ATDT#777' TIMEOUT 60 'CONNECT'
!
ip ssh authentication-retries 2
ip ssh port 2200 rotary 1
ip ssh version 2
[code]..
Cisco Infrastructure :: Connect Two Router With One HWIC-4ESW Card?
Sep 2, 2011How Can I connect two router with one HWIC-4ESW card , I have Problem with this because when I tried to do , I received the message I can´t configure IP address on L2. The idea is to connect two routers with /30.
Cisco Switching/Routing :: Not Detecting HWIC-2T In 1921 Router?
Oct 15, 2012I Have installed HWIC-2T card in my cisco 1921 router but it is not able to detected in router. find the ver of router
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: [URL] Copyright (c) 1986-2012 by Cisco Systems, Inc.Compiled Tue 20-Mar-12
Blackjack iphone app real money. [Code]...
Cisco WAN :: Apply MQC On 4 Port HWIC-4ESW - 3845 Router?
Mar 24, 2011I have 3845 Router with HWIC-4ESW & I am trying to apply MQC on SVI interface but I keep getting configuration Error!-RTR(config-if)#service-policy output XYZ_WAN_QOS Configuration failed I believe that HWIC-4ESW is Layer 2 port & you can not apply Module Qos on SVI interface. I am exploring other option.
I have following link for 1 OR 2 Port Fast Ethernet port but not sure whether this will support what I am looking for.[URL] Aslo I have HWIC-1GE-SFP card on Same router where MQC works fine .interface GigabitEthernet0/1 description METRO-E duplex auto speed auto media-type rj45 service-policy output Metro-E?
Cisco WAN :: 2821 Router / Card Hwic-D-9ESW - Cannot Ping To Interface
Cisco Hwic 4esw
Jan 23, 2011Cisco 1941 Hwic Slots Slot
I have some issue on Card Hwic-D-9ESW with Router 2821, i was install card 9ESW in to router 2821 on slot 2 and 3. After I show run, the Cisco Router 2821 have interface F0/3/0 - F0/3/8.and i configure V lan already and interface up also.
When i connect PC to port F0/3/0, the interface is up, but i cannot pint go interface, i mean it request time out. My question is, Is it correct that i install card into slot 2 and 3?
What is the problem all port up but i cannot ping to interface?
Note: the same V lan